Elf Prototype
The Elf is a very small Mini-ITX chassis constructed of bamboo. It is nearly as small as a Mini-ITX computer can possibly be. Even at this small size, it achieves excellent cooling efficiency, and can run an Intel Core i3 processor at full load at a low noise level.
Availability
As of October 2010, I am tweaking the design for a thinner multi-ply bamboo, as Ponoko (the laser cutting service I am using) has discontinued the single-ply bamboo I was previously using. I hope to have the updated design ready for purchase by late 2010. Follow me on Twitter for updates and insider info.
Features
- Dimensions: 78 × 200 × 216 mm / 3.1 × 7.9 × 8.5 inches
- Designed for 73W Intel LGA 1156 CPUs (i3 and certain i5 models)
- Fits two 2.5" HDDs/SSDs
- Powered by a PicoPSU
- No case fans—just the CPU fan
Caveats
- No front panel USB or sound ports
- No room for PCI[-e] card
- No optical drive
- No 3.5" drives
- No indicator LEDs (power/HDD activity)
Prototype #3
Changes since prototype #2:
- Eliminated some unnecessary tabs/slot joints, and made the ones that run along the grain much longer, and less prone to breakage.
Schematic:
Prototype #2
Changes since prototype #1:
- 7% smaller (in volume). Gained 20mm in depth; lost 19mm in height; lost 7mm width.
- Fewer screws on the joints.
- Added "Elf" text and made vent holes look way better.
- Now designed for use with stock cooler/fan and no case fans!
- Fixed a bunch of things.
Assembled:
Running some stress tests:
Schematic:
Motherboard Compatibility
Compatibility mostly just depends on the CPU being in the corner closest to both the RAM and PCI-E slots. For that reason, the DFI LANParty MI P55-T36 will not fit. As a P55 board, it would be useless anyway, as it does not support onboard video, and the case has no room for a video card.
The following boards should work:
- GIGABYTE GA-H55N-USB3 (verified)
- Intel DH57JG
- ECS H55H-I
- ZOTAC H55ITX-A-E
Prototype #1 (Old)
For posterity...
Schematic:
This prototype didn't quite fit together, but it gives you a glimpse of what's to come:
Title font: Playtime Bold by John Skelton.


comments
blog comments powered by Disqus